STRENGTH WITHOUT DRILLING
BACKRACK™ Cab Guards utilize existing holes within the truck's stake
pockets wherever possible. Each Hardware Kit is truck specific because
we design and engineer our Stake Pocket Bolts to fit into these existing
holes wherever and whenever possible. In instances where there are no
stake pockets, we unfortunately require you to drill through the bed
rail. We never hesitate to invest in the tooling and design required to
create simple but effective fastening systems for our products.
STANDARD NO DRILL
Our STANDARD no drill Hardware Kit is designed to be used on trucks
that will not have a cross bed Toolbox behind the cab. This system
consists of a Railmount Bracket and Rail Plate that adds strength to the
sheet metal bed rail of the truck. The Rail Plate provides a solid
base on which to secure the Cab Guard assembly. Only this Hardware Kit
is compatible with TONNEAU COVER ADAPTER Brackets.
TOOLBOX NO DRILL
Our TOOLBOX no drill Hardware Kit is designed to accommodate a
standard 21" cross bed Toolbox. The Toolbox sits on top of the Toolbox
Brackets allowing you to slide the Toolbox forward so that bed space is
not wasted. The Toolbox is secured to the TOOLBOX BRACKETS by drilling
sheet metal screws through the Toolbox and into the top of the TOOLBOX
BRACKET. Drill and bolt is also acceptable. Clamp hooks that come with
the Toolbox are not required. TOOLBOX BRACKETS are also available in
31" length as an accessory. Not compatible with TONNEAU COVER ADAPTER
Brackets.